Paint Protection Films

Paint Protection Films

Paint protection film is a thermoplastic urethane film which is used to protect the motorcycles original paint job from scratches, rock chips and contaminants.

Paint protection will help your motorbike to keep the shiny appearance and the resale value

Before / After

Before / After …

After
Before
Steps

Steps

One

At Foilack we make sure before adding the paint protection films the surface of the motorbike is washed and cleaned properly so that there will not be any dirt on the films.

Two

We check the position, shape and size pf the motorbike before installingthe films.

Three

We cleaning the surface of the motorcyle before the paint protection film is applied.

Four

Pull the protective liner back from the ppf to reveal the adhesive side.

Five

Spray water with liquid on top of piece so the squeegee will not stick or scratch the film. Starting in centre, squeegee out solution and any bubbles. Overlap squeegee strokes to avoid leaving any bubbles under material.

Six

For recessed areas or compound curves, make the adhesive wet again and slowly squeegee again with the firm pressure. The ppf will stretch. Some pieces will require stretching to obtain proper fit and to conform to contour of curves. 7.Check the material often for bubbles. Wait 48-72 hrs before washing. Then you may wash and wax it just as normal.